
PENN Hardware 19" Rack Mount Cable Support / Tie Bar
1/2U Horizontal lacer bar Slots for cable ties Depth - 133mm /5.24inch Weight - 0.11kg / 0.25lb Material - Steel
1/2U Horizontal lacer bar Slots for cable ties Depth - 133mm /5.24inch Weight - 0.11kg / 0.25lb Material - Steel
1/2U Horizontal lacer bar Slots for cable ties Depth - 12.4mm / 1/2 Weight - 0.11kg / 0.25lb Material - Steel
1/2U Horizontal lacer bar Slots for cable ties Depth - 92mm /3.62inch Weight - 0.11kg / 0.25lb Material - Steel
1/2U Horizontal lacer bar Slots for cable ties Depth - 12.4mm / 1/2 Weight - 0.11kg / 0.25lb Material - Steel
Large MOL™ Latch with new Cantilever Automatic Open/Close function. Multiple Patents Pending. In Plain or Offset Dish
used with Extrusion E0490, Corner C0675/30 and Hook P2472 Sliding Latch System - Sliding Latch mini
Lockable Slam Latch for Slam-Lid System, with tabs so lid can be hooked on to side of the case. Easy assembly - Drill or route a finger hole and a...
View full detailsMedium Ball Corner Internal Radius: 1.2mm / 0.05" Material: 1.2mm / 18 gauge Steel Finish: PennBrite
Offset to suit Extrusions up to 35mm / 1.38" Load rating: 150Kg / 330.69Lb
2U Hinged Rack Panel, Vented. Black Powder Coated. Material: 1.2mm/0.047in Steel Note : This hinged door is for use on rack rail between 1.5mm / 0...
View full details3U Hinged Rack Panel, Vented. Black Powder Coated. Material: 1.2mm/0.047in Steel Note : This hinged door is for use on rack rail between 1.5mm / 0...
View full details4U Hinged Rack Panel, Vented. Black Powder Coated. Material: 1.2mm/0.047in Steel Note : This hinged door is for use on rack rail between 1.5mm / 0...
View full details6U Hinged Rack Panel, Vented. Black Powder Coated. Material: 1.2mm/0.047in Steel Note : This hinged door is for use on rack rail between 1.5mm / 0...
View full detailsSign up and stay informed.
Receive EXCLUSIVE offers