Accessories

Aluminium case angle 22x22mm>||< 1.6 mm

Medium Ball Corner Internal Radius: 1.2mm / 0.05"Material: 1.2mm / 18 gauge SteelFinish: PennBrite

Large Corner Brace for 35 mm Case Angle.1,2 mm Steel, zinc plated.Fixing holes: 5,1 mm

For briefacase and rack drawers With approximately 250 elastic straps in a smart grid arrangement this board holds tools, gadgets and all kinds of ...

Recessed sprung handle with full width grip and strengthened top plate in 8 mm deep steel dish. Zinc plated with black PVC grip.Fixing holes: 5.1 mm

9mm Birch-Ply laminated each sideDividing wall for use with RML

Cable connector carrier consists of a nickel shell, chuck and boot. The boot (same as X-series) is suitable for cable diameters from 3.5 - 8 mm. Fo...

15mm Birch-Ply phenolic4x blue wheels 100mm. (2 with brake)

3U Hinged Rack Panel, Vented.Black Powder Coated.Material: 1.2mm/0.047in SteelNote :This hinged door is for use on rack rail between 1.5mm / 0.06 t...

2U Hinged Rack Panel, Vented.Black Powder Coated.Material: 1.2mm/0.047in SteelNote :This hinged door is for use on rack rail between 1.5mm / 0.06 t...

1.5 m power cord with 3x1.5 mm² conductors (15 AWG)Right-angle type F grounded plug (CEE 7/7) to Power Twist connectorCompatible with powerCON chas...

1.35 m power cord with 3x1.5 mm² conductors (15 AWG)Power Cord BS1363/A (UK) - Powercon NAC3FCA 1,35 m

Power Link with Rubber cable H07RN-FEquipped with genuine Neutrik Powercon connectorsProduct type Pre-assembled CablesType Power cordType Power Ext...

Power Link with Rubber cable H07RN-FEquipped with genuine Neutrik Powercon connectorsProduct type Pre-assembled CablesType Power cordType Power Ext...

Power Link with Rubber cable H07RN-FEquipped with genuine Neutrik Powercon connectorsProduct type Pre-assembled CablesType Power cordType Power Ext...

2mm steel, black powder coated

19" U-Shaped Rack panel 3U2mm SteelBlack powder coated

19" U-Shaped Rack panel Punched for universal D-Series (XLR/Powercon)2mm SteelBlack powder coatedStandardized D-Series sized 24mm panel cutout

19" U-Shaped Rack panel Punched for universal D-Series (XLR/Powercon)2mm SteelBlack powder coatedStandardized D-Series sized 24mm panel cutout

4U rack Pannel

19" U-Shaped Rack panel Punched for universal D-Series (XLR/Powercon)2mm SteelBlack powder coatedStandardized D-Series sized 24mm panel cutout

U-shaped Rack panel2mm Aluminium, black powder coated