Type B Hardware

Recessed sprung handle with full width grip and strengthened top plate in 8 mm deep steel dish. Zinc plated with black PVC grip. Fixing holes: 5.1 mm

19" steel Rack Drawer Full extension ball race drawer slide Incl. Cylinder look and 2 keys features a coupling on the drawer slide, allowing for re...

Heavy duty rack strip with three holes per U 9.5mm hole size (according to IEC 60297) 2mm steel, black powder coated Suitable cage nut: 5653 Length...

Diâmetro da roda 80mm Largura da roda 34mm Medida da placa de fixação 105x85mm Distância de furação 80/77x60mm Diâmetro de furação 9mm Diâm.d. raio...

Medium Ball Corner Internal Radius: 1.2mm / 0.05" Material: 1.2mm / 18 gauge Steel Finish: PennBrite

Made in synthetic leather Embroidered with "We Are Part Of The Show"

6U Hinged Rack Panel, Vented. Black Powder Coated. Material: 1.2mm/0.047in Steel Note : This hinged door is for use on rack rail between 1.5mm / 0...

Rack Fitting Kit (RFK) 48x Phillips-head Screws M6x16 48x Cage Nuts M6 for 2 mm rackstrip 48x Washers flat black M6

19" Rack Drawers Material Steel Surface Powder coated Colour Black Outside height 2 U Outside width 434 mm Outside depth 385 mm Inside height 80 mm...

The result is a small, very high-quality, smoothly running castor that can installed even on small flight cases without requiring an additional dol...

5 pole female receptacle, solder cups, Nickel housing, silver contacts The DLX series features a compact all metal housing with an ingenious duple...

Heavy duty hook over hinge 2,2 mm Steel, zinc plated Fixing holes 5 mm

Aluminium sliding rack strip required inside width: 482 mm Replaces part no. 6160

Medium locking drawbolt. Finish: Chrome plated steel. Fixing holes: 3.6 mm Weight: 50 g

Diâmetro da roda 100mm Largura da roda 34mm Medida da placa de fixação 105 x 85mm Distância de furação 80/77 x 60mm Diâmetro de furação 9mm Diâm.d....

Diâmetro da roda 80mm Largura da roda 34mm Medida da placa de fixação 105x85mm Distância de furação 80/77 x 60mm Diâmetro de furação 9mm Diâm.d. ra...

Wheel diameter 100 mm Width of Tread 34 mm Size of Plate 105 x 85 mm Plate hole centres 80/77 x 60 mm Plate hole 9 mm Offset 41 mm Swivel Interfere...

19" Rack Cradle for top mounting in open top rack. Supplied with self-adhesive Velcro to enable small mixers, effects, etc., to be mounted. Steel, ...

Espuma "Eggbox" é um método popular para o controle de reverberação. Valores de absorção de som excelente 30mm de espuma de absorção de som Resiste...

Santosom laptop support 15mm black plastic - PE500

Espuma "Eggbox" é um método popular para o controle de reverberação. Valores de absorção de som excelente 50 milímetros de espuma de absorção de so...

For roadcase Drawers 10mm Birch-Ply laminated

A abraçadeira cabo perfeito! Maneira barata, fácil e rápido para amarrar cabos. Dimensões: Largura: 50 mm Comprimento: 500 mm

1.5 m power cord with 3x1.5 mm² conductors (15 AWG) Type F CEE 7/7 Schuko Grounded Plug - Powercon TRUE1 NAC3FX-W-TOP

150-pin cable-mount male audio connector Easy and error-free mating Audible snap in quick bayonet lock Excellent resistance against unlocking

Our V3, V4 and V5 Butterflies have a patented ´push-down` mechanism that lifts the hook out of the keeper plate on opening and leads it back into t...

19" U-Shaped Rack panel 1U Punched for universal D-Series (XLR/Powercon) 2mm Steel Black powder coated Standardized D-Series sized 24mm panel cutout

U-shaped Rack panel 2mm Aluminium, black powder coated

U-shaped Rack panel 2mm Aluminium, black powder coated

U-shaped Rack panel 2mm Aluminium, black powder coated

Made in synthetic leather Embroidered with "We Are Part Of The Show"

Made in synthetic leather Embroidered with "We Are Part Of The Show"

Santosom laptop support 10mm black plastic - PE500

Made in synthetic leather Embroidered with "We Are Part Of The Show"

Made in synthetic leather Embroidered with "We Are Part Of The Show"

Made in synthetic leather Embroidered with "We Are Part Of The Show"