Acessórios

The lid of the rack is to be used as a table top which can be set up next to the rack. A pair of folding legs are fitted inside the lid and a pair ...

Ether Puzzle Foam Thickness: 160mm Sheet Size: 405x370mm Colour: grey Material: polyether Other features: Press-out pre-cut 15mm squares

3U Hinged Rack Panel, Vented. Black Powder Coated. Material: 1.2mm/0.047in Steel Note : This hinged door is for use on rack rail between 1.5mm / 0...

2U Hinged Rack Panel, Vented. Black Powder Coated. Material: 1.2mm/0.047in Steel Note : This hinged door is for use on rack rail between 1.5mm / 0...

19" Rack Drawer on ball-bearing chassis rail. Fully extendable Built-in lock Removable by quick release of the chassis rails Material: aluminium Su...

1/2U Horizontal lacer bar Slots for cable ties Depth - 12.4mm / 1/2 Weight - 0.11kg / 0.25lb Material - Steel https://www.youtube.com/watch?v=UIek...

19" Rack Cradle for top mounting in open top rack. Supplied with self-adhesive Velcro to enable small mixers, effects, etc., to be mounted. Steel, ...

USB 3.0 feedthrough adapter Reversible insert offering type A or B on front or rear end Standard D-shape housing Removable screen for chassis groun...

5 pole female receptacle, solder cups, Nickel housing, silver contacts The DLX series features a compact all metal housing with an ingenious duple...

Contact resistance - = 3 mO Dielectric strength - 4 kVdc / 2.8 kVac Insulation resistance - > 0.1 GO (after damp heat test IEC 68-2-30) Number o...

15mm birch-Ply

15mm Birch-Ply phenolic 4x blue wheels 100mm. (2 with brake)

Santosom laptop support 15mm black plastic - PE500

Speaker front foam Black Permits free passage of air Sheet Size: 200x150cm Thickness: 10mm

The result is a small, very high-quality, smoothly running castor that can installed even on small flight cases without requiring an additional dol...

Sprung handle for surface mounting with black PVC grip, based on 34082 design Steel, zinc plated Fixing holes Ø 5,1 mm

Aluminium sliding rack strip required inside width: 482 mm Replaces part no. 6160

Leather Case Handle. Finish: Black leather stitched to nylon inner with nickel 'D' ring and mounting plate. Fixing holes: 5.6 mm Weight: 84 g

Medium ball corner - 3 leg - 1,2 mm Steel, zinc plated. Fixing holes: 5,1 mm. Weight: 55g

Diâmetro da roda 100mm Largura da roda 34mm Medida da placa de fixação 105 x 85mm Distância de furação 80/77 x 60mm Diâmetro de furação 9mm Diâm.d....

Wheel suitable for use in flight cases Diameter 80 mm Width of Tread 34 mm Size of Plate 105 x 85 mm Plate hole centres 80/77 x 60 mm Plate hole 9 ...

Medium ball corner with stacking dimple 3 short legs 1,5 mm Steel Zinc plated Fixing holes: 5,1 mm

Castor dish for mounting on case lid to allow a case with castors up to Ø100 mm to be stacked on top. 1,5 mm steel, zinc plated. Fixing holes Ø 5.1...