Adam Hall

Power Link with Rubber cable H07RN-F Equipped with genuine Neutrik Powercon connectors Product type Pre-assembled Cables Type Power cord Type Power Extension Cable Length 1.5 m Colour Black Cable type 3G1 / H07RN-F Center conductor cross section 3 x 1.5 mm² Connector 1 NAC3FCA Connector 2 NAC3FCB Weight 0,3 kg

1.5 m power cord with 3x1.5 mm² conductors (15 AWG) Right-angle type F grounded plug (CEE 7/7) to Power Twist connector Compatible with powerCON chassis connectors

19" Housing, with ventilation slots in top panel 1.2mm steel Front panel 3mm Aluminium, black powder coated Flat-packed with screws Depth: 250mm 1U

Professional rack light with patented Smart Motion sensor technology Strip with 18 LEDs Timer control and adjustable sleep mode dimmer Continuous dimming Memory function Including power supply with strain relief This rack light with patented Smart Motion sensor technology features a strip of 18 ultra-bright white LEDs to deliver consistent illumination across the entire rack width. It is switched on by pressing and holding the power button; a motion sensor activates the LEDs. They remain lit for the period configured in the timer, and if no further movement is detected, switch automatically into sleep mode with adjustable dimmer. In this way, the energy-saving motion sensor light rack is the ideal choice for practical, adjustable rack lighting. https://www.adamhall.com/shop/pt-en/19-inch-rack-accessories/19-inch-rack-lights/15696/87451-smart

Mains Distribution Unit 19"/1 U Illuminated 2-pole switch on the front panel 8 mains outlets on the rear panel 16A/250 V AC Black aluminium housing 54 mm deep 2 mtr. cable 19" ears can be turned around

3 m power cord with 3x1.5 mm² conductors Power Cord BS1363/A (UK) - IEC C13

Power Link with Rubber cable H07RN-F Equipped with genuine Neutrik Powercon connectors Product type Pre-assembled Cables Type Power cord Type Power Extension Cable Length 3 m Colour Black Cable type 3G1 / H07RN-F Center conductor cross section 3 x 1.5 mm² Connector 1 NAC3FCA Connector 2 NAC3FCB Weight 0,3 kg

compact, non-slip cable protector made of black, recyclable polyurethane yellow polyethylene lid with high warning effect and secure closure (also available with black lid, Item No. 85200BLK) patented, self-cleaning lid hinge 3 channels: 1 channel 35x35mm, 2 channels 35x30mm load bearing capacity approx. 2t / 20x20cm fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537) resistant to oil, acids, solvents, and petrol reliable protection for cables and personnel for indoor and outdoor use

compact, non-slip cable protector made of black, recyclable polyurethane yellow polyethylene lid with high warning effect and secure closure (also available with black lid, Item No. 85200BLK) patented, self-cleaning lid hinge 3 channels: 1 channel 35 x 35 mm, 2 channels 35 x 30 mm load bearing capacity approx. 2t / 20 x 20 cm fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537) resistant to oil, acids, solvents, and petrol reliable protection for cables and personnel for indoor and outdoor use not suitable for vehicular traffic

Power Link with Rubber cable H07RN-F Equipped with genuine Neutrik Powercon connectors Product type Pre-assembled Cables Type Power cord Type Power Extension Cable Length 5 m Colour Black Cable type 3G1 / H07RN-F Center conductor cross section 3 x 1.5 mm² Connector 1 NAC3FCA Connector 2 NAC3FCB Weight 0,5 kg

Speaker front foam color Black Permits free passage of air Sheet Size: 200x150cm Thickness: 6mm

Speaker front foam Black Permits free passage of air Sheet Size: 200x150cm Thickness: 10mm

Speaker front foam Black Permits free passage of air Sheet Size: 200x150cm Thickness: 15mm

Speaker front foam Black Permits free passage of air Sheet Size: 200x150cm Thickness: 20mm

Protecteurs de câbles Courbe de 45 degrés avec connexion

Heavy-duty crossover cable with 3 channels for the crossing up to 52mm of section. Width (Channels): 52, 45, 56mm Height (Channels): 49, 50, 49mm Flame Class: B2 Load bearing: Approx 5 tons per typical tyre imprint (20x20cm) The Cable-Crossover is oil, acid & petrol resistant Operating Range: -30°C up to +60°C DEKRA certified - Certified product safety 2 connector plugs included

Connector plugs are available in pairs.

End ramp for cable outlet reduces the risk of tripping.

The ultimate enhancement for heavy loads. Our DEFENDER Compact remains true to form: Handy, quickly assembled, with low crossover height and now able to withstand heavy loads. The unique Compact base with a weight of 3.5 kg is attached to the Compact to form a single unit. Thus reinforced, the Compact can withstand extreme loads. Even forklifts and lifting trucks can now drive over this cross -over with no problem. The 5 cable ducts, each with a diameter of 22mm, provide ample space for many applications. If a line of several DEFENDER Compact units with base is assembled, the row now remains stable even if a car drives over it. •Length: 80.40 cm •Width: 24.10 cm •Channels: 5 •DEKRA certified - Certified product safety

An inexpensive version of the Defender III system. The arrangement of supports moulded into the bottom permits the Defender Compact to be laid over a run of cables, supporting the weight of crossing vehicles. Black polyurethane construction with ribbed non-slip surface. Not suitable for trucks! •Channels: 7 •Width (Channels): 28mm •Height (Channels): 30mm •3 years of guarantee from date of purchase! •DEKRA certified - Certified product safety Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.

New laser-cut slip- and crush-resistant 3D surface Patented self-cleaning hinge and convenient locking system 2 channels, each 35 x 30 mm Load capacity approx. 2 t/20 x 20 cm Fire protection class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537) Resistant to oil, acids, solvents, and petrol Dimensions 1005 x 273 x 48 mm, weight approx. 5.2 kg New ergonomic design for improved stability when walked or driven on Manufactured with extremely robust and non-breakable TPU Customised branding possible 5-year guarantee

45° curve for Defender MIDI

Heavy-duty crossover cable with 5 channels for the crossing up to 34mm of section. (EU Patent No.: EP1366550) Width (Channels): 34mm Height (Channels): 36mm Gradient: 17 degrees Flame Class: B2 Load bearing: Approx 5 tons per typical tyre imprint (20x20cm) The Cable-Crossover is oil, acid & petrol resistant Operating Range: -30°C up to +60°C DEKRA certified - Certified product safety

Heavy-duty crossover cable with 5 channels for the crossing up to 34mm of section. (EU Patent No.: EP1366550) Width (Channels): 34mm Height (Channels): 36mm Gradient: 17 degrees Flame Class: B2 Load bearing: Approx 5 tons per typical tyre imprint (20x20cm) The Cable-Crossover is oil, acid & petrol resistant Operating Range: -30°C up to +60°C