5 pole female receptacle, solder cups, Nickel housing, silver contacts The DLX series features a compact all metal housing with an ingenious duple...
View full details
Contact resistance - = 3 mO Dielectric strength - 4 kVdc / 2.8 kVac Insulation resistance - > 0.1 GO (after damp heat test IEC 68-2-30) Number o...
View full details
Contact resistance = 3 mO Dielectric strength - 4 kVdc / 2.8 kVac Insulation resistance - > 0.1 GO (after damp heat test IEC 68-2-30) Number of ...
View full details
Santosom support 15mm black plastic - PE500
15mm Birch-Ply phenolic 4x blue wheels 100mm. (2 with brake)
Santosom laptop support 15mm black plastic - PE500
Santosom laptop support 15mm black plastic - PE500
9mm Birch-Ply laminated each side Dividing wall for use with dividing wall rail
Speaker front foam Black Permits free passage of air Sheet Size: 200x150cm Thickness: 10mm
With holes for water drain. Cutout: 145 mm Fixing holes Ø 5.5 mm
Steel Bar Handle, black powder coated, mounted in recessed black plastic dish. Cutout 170 x 113mm. Fixing Holes 5.1mm
Fan 220 - 240V / 21 W 56 / 60 Hz 2700 / 3100 U/Min noise level: 41db Aluminium cast chassis
Works with Extrusion E0490 and Catch Plate L2572-CP Patent Pending
Lid stay - Click stop. 1.5 mm Steel, nickel plated
Medium ball corner - 3 leg - 1,2 mm Steel, zinc plated. Fixing holes: 5,1 mm. Weight: 55g
Diâmetro da roda 100mm Largura da roda 34mm Medida da placa de fixação 105 x 85mm Distância de furação 80/77 x 60mm Diâmetro de furação 9mm Diâm.d....
View full details
Wheel suitable for use in flight cases Diameter 80 mm Width of Tread 34 mm Size of Plate 105 x 85 mm Plate hole centres 80/77 x 60 mm Plate hole 9 ...
View full details
16541, 16542, 16543 Used with 6145, PERFIL.UX9 Sliding Latch System - Sliding Latch
Castor dish for mounting on case lid to allow a case with castors up to Ø100 mm to be stacked on top. 1,5 mm steel, zinc plated. Fixing holes Ø 5.1...
View full details
Small case corner - 3 leg 1mm Steel, chrome plated. Fixing holes: 4,1 mm.
Medium duty Butt hinge 1.2 mm Steel, zinc plated Fixing holes: 5.1 mm Can be used as end piece for Piano hinge 2605
Large heavy duty ball corner made of 2mm steel, cranked for 35mm-angle profile with three holes per leg.
Diâmetro da roda 100mm Largura da roda 40mm Placa de fixação 105x85mm Altura total 128mm Norma EN 12532 Peso da roda 1.07kg Capacidade de carga 200...
View full details
