Accessories

Allows with standar 100 x 80mm mounting plate to be mounted securely and conventiently.

Castor plate, polyamide black, 240x167 mm. Allows castors with standard 100 x 80mm mounting plate to be mounted securely and conveniently. 1 Set re...

Roping eye Single cargo spring stud To clip into 5725, 5720, 5721 Ring inside diameter: 29,5 mm Max Load Bearing: 300 daN

Medium stop-hinge. Stops at 95°. 1 mm Steel, chrome plated. Fixing holes: 4.1 mm Weight: 26 g

Large overlatching butterfly catch in dish. Steel, zinc plated. Keep (not included) = 1630KEEP. Weight: 360g

This Corner is made to fit over 30 mm angle extrusion and the 6145 lid extrusion.

Plastic Foot black matches castors 3745 and 3750

Castor dish for mounting on case lid to allow a case with castors up to 100 mm to be stacked on top 1,5 mm steel, zinc plated Fixing holes Ø 5,1 mm

Surface mount keeper plate for 17302 large overlatch catch. Steel, zinc plated. Fixing holes: 5,1mm height: 3,1 cm width: 7,4 cm

Briefcase drop handle Black plastic with nickel coverplate Weight: 70g Distance between fixing holes: 5,75 cm Max load: 25kg

Ventilation dish - horizontal 1 mm Steel, zinc plated Cutout 126 mm x 74 mm Fixing holes Ø 5,1 mm

Castor dish for mounting on case lid to allow a case with castors up to 100mm to be stacked on top. The crank in the dish allows it to be mounted o...

Castor dish for mounting on case lid to allow a case with castors up to 100 mm to be stacked on top 1,5 mm steel, zinc plated Fixing holes Ø 5,1 mm

Catch Plate for L2572 Slam Lock. Suits Extrusion E0490

Wire lid stay, 2,5x300mm. Flexible stainless steel wire. Weight 18 g

Combined ball corner and brace 68mm high. 1.5mm Steel, zinc plated. Fixing holes 5,1mm

Back plate for recessed 34085 handle. 1 mm Steel, zinc plated. Weight: 50 g

Medium ball corner - 3 short legs 1,5 mm Steel, zinc plated Fixing holes: 5,1 mm

Também pode ser usado como painel pequeno conector (unpunched). Material: Aço Material Espessura: 1,2 mm Superfície: zinco chapeado Furos de fixaçã...

Combined ball corner and brace to suit 52 mm lidmaker - 1,5 mm Steel, zinc plated. Fixing holes: 5,1 mm. Weight: 72g

Case corner 3 leg 1.5 mm steel zinc plated Fixing holes 5.0 mm

Case corner - 3 leg 1 mm Steel, zinc plated Fixing holes: 5.1 mm

Hinge, small, 1,3 mm Steel zinc plated Fits on 6102 lid location. Weight: 24g

Square case/cabinet corner 1.5 mm internal radius 1 mm Steel, zinc plated Fixing holes: 5,2 mm