Accessories

1/2U Horizontal lacer bar Slots for cable ties Depth - 12.4mm / 1/2 Weight - 0.11kg / 0.25lb Material - Steel https://www.youtube.com/watch?v=UIekCQgRSbE

1/2U Horizontal lacer bar Slots for cable ties Depth - 133mm /5.24inch Weight - 0.11kg / 0.25lb Material - Steel https://www.youtube.com/watch?v=UIekCQgRSbE

Organizer with approx. 150 elastic straps Keeps tools, gadgets and cords firmly in place Endless individual configurations Rear zip pocket for extra storage Flexible use in gig bags, laptop bags etc. 2 hanging loops

PE foam "Plastazote" 33kg/m3 Sheet Size: 2000x1000mm Thickness: 5mm

To fit all 35 mm speaker stands Height: 55 mm

Diâmetro da roda 100mm Largura da roda 40mm Placa de fixação 105x85mm Altura total 128mm Norma EN 12532 Peso da roda 1.5kg Capacidade de carga 200kg Cap. de carga estática 400kg

Lightweight Aluminum Folding Table Legs H=750mm

Block Catch Backplate Part no. L1290/BP Specifications Material: Steel

L-hinge large Combination of corner brace 40403 and piano hinge Material: steel 1,5 mm Surface: zinc plated Fixing Holes: 5,1 mm L-hinge large, Combination of corner brace 40403 and piano hinge

Dim. Ext.: 222x170 mm Dim. Ins.: 185x135 mm. Cutout: 195 x 145mm 1mm Steel zinc plated. Internal depth: 6mm Fixing holes: 5,1mm

Universal Partitioning for Rack Drawers 2 U or higher, or any drawer (office, etc.) with a minimum internal height of 70 mm. Black Plastic, supplied in 50cm lengths with click joiners at each end. Can be easilycut to the required length.

Partitioning for Adam Hall Rack Drawer 2 U or higher. P1 fits across the width of the drawer, P2 fits along the depth. Use as many as required to give further compartments.

Partitioning for Adam Hall Rack Drawer 2U or higher. P1 fits across the width of the drawer, P2 fits along the depth. Use as many as required to create further compartments.

Flat Rack panel 2U 2 mm Steel, black powder coated

U-Shaped Rack Panel 1/2U For all those horrid little gaps in a rack that are just a tad too small for a 1U panel 1.5 mm Steel, black powder coated

Flat Rack panel 2mm Steel black powder coated 1U

This corner castor has a ball-bearing wheel with a tread of transparent PU on a PP core in a die-cast housing made of aluminium. The wheel has a load capacity of up to 100 kg (for a set consisting of two wheels). •Product Type: castor •Type: corner castor wheel •Wheel Ø: 48mm •Height (mm): 18mm •Construction: no stopper •Housing Material: aluminium •Thickness: 3mm •Wheel Material: polyurethane •Wheel Colour: transparent •Bearing Type: ball bearing •Rated Load Per Set: 100kg •Set Consists of: 2 •Mounting Hole Diameter: 5.1mm •Rim Width: 24mm •Tread Width: 5mm •Other Features: low-noise, non-marking

Large MOL™ Latch with new Cantilever Automatic Open/Close function. Multiple Patents Pending. In Plain or Offset Dish

Surface Mount Keeper Plate for 17343 small Overlatch, cranked to fit over 6102 location. Height: 3,0 cm Width: 5,9 cm

19" angled rack panel with 8 cutouts for D-type sockets - with rear strain relief rail. The mounting holes are fitted with M3 threads; the tilt angle is 30°. The front overhead surface is intended for labels - a magnetic labelling strip is included. •Type: 8 D-Series •Material: steel •Surface: powder-coated •Colour: black •Height: 1U •Width: 19" •Thickness: 2 mm •In Addition: Incl. magnetic labelling strip, 8x cable ties

19" U-Shaped Rack panel 1U Punched for universal D-Series (XLR/Powercon) 2mm Steel Black powder coated Connectors NOT included

The same Large Butterfly "V3" with "push-down" function as in the 172511 but in a shorter dish. The entire mechanism is identical thereby having the same strength and loading capabilities. The dish is shorter giving a chunky look and easier use in smaller cases and flatter lids. Our V3, V4 and V5 Butterflies have a patented ´push-down` mechanism that lifts the hook out of the keeper plate on opening and leads it back into the dish on closing. This offers an ideal handling and minimises risk of injury and damage.

19" Rack-Cradle extra deep for mounting non standard equipment with a depth of up to 375 mm Rear edge is folded up 10 mm for extra stability Internal width: 435 mm Ventilation slots in sides 1,6 mm stell, black powder coated

19" Rackcradle for mounting non standard equipment Internal width: 435 mm Ventilation slots in sides 1,6mm stell, black powder coated